View HO4002-1_1250927.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Preliminary
(R)
HO4002-1 400.0 MHz SAW Oscillator
* * *
SAW Frequency Stabilization Fundamental-Mode Oscillation at 400.0 MHz A Rugged, Compact General-Purpose Oscillator
The frequency of this oscillator is stabilized by surface-acoustic-wave (SAW) technology. This results in excellent performance from a compact, rugged, oscillator operating at the fundamental frequency of 400.0 MHz. The high-reliability of the HO4002-1 makes it suitable for general purpose use in a wide variety of applications.
Absolute Maximum Ratings
Rating DC Supply Voltage Case Temperature Powered Storage Value 0 to +13 -40 to +70 -40 to +85 Units VDC C
Dip 16-8 Case
Electrical Characteristics
Characteristic Operating Frequency AbsoluteFrequency Tune Range Tune Voltage Tuning Linearity RF Output Power Discrete Spurious Second Harmonics Third and Higher Harmonics SSB Phase Noise Nonharmonic 1 kHz Offset 10 kHz Offset 100 kHz Offset RF Impedance DC Power Supply Nominal Impedance Operating Load VSWR Operating Voltage Operating Current Operating Case Temperature Lid Symbolization (YY=Year, WW=Week) ZO GL VCC ICC TC 3, 6 -20 RFM HO4002-1 YYWW 3 3, 5 3, 6 10.8 -80 -100 -130 -150 50 12 2:1 13.2 45 +70 VDC mA C PO 3, 6 2, 3, 4 +7 Sym fO Notes 1, 7 399.960 0 3:1 +10 -15 -20 -95 -125 dBc/Hz Minimum Typical 400.00 Maximum 400.040 +10 4:1 dBm dBc Units MHz MHz VDC
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. COCOM CAUTION: Approval by the U.S. Department of Commerce is required prior to export of this device. Notes:
1. 2. 3. 4. One or more of the following United States patents apply: 4,616,197; 4,610,681; and 4,761,616. Unless noted otherwise, all specifications are listed at TC = +25C 2C, VCC = nominal voltage 0.01 VDC, and load impedance = 50 with VSWR 1.5:1. The design, manufacturing process , and specification of this device are subject to change without notice. Applies to oscillator only and not to sidebands caused by external electrical or mechanical sources. (Dedicated external voltage regulation with low-frequency filtering for the DC power supply and proper circuit board layout are recommended for optimum spectral purity.) For specified maximum operating load VSWR (any angle) at FO. (No instability or damage will occur for any passive load impedance.) For any combination of VCC and TC within the specified operating ranges. Applies for any combination of Note 5 and 6 conditions.
BLOCK DIAGRAM
V CC
RF OUTPUT SAW Oscillator Buffer Amplifier
ELECTRICAL CONNECTIONS
VCC 1 Case Ground 2 V tune 15 Case Ground
5. 6. 7.
Top View
Case Ground 7 RF Output 8
10 Case Ground 9 V CC
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com http://www.rfm.com HO4002-1-043003
Page 1 of 2
400.0 MHz
DIP16-8
SAW Oscillator
Metal Dual-Inline Package with 8 leads in a 16-lead DIP configuration
mm Dimension MIN A B C D E F G H K L M N R -- -- -- 0.40 MAX 25.02 12.83 6.35 0.51 MIN -- -- -- 0.016
Inches MAX 0.985 0.505 0.250 0.020
0.64 Nominal 7.62 Nominal 2.54 Nominal 17.78 Nominal 3,39 1.30 -- -- 1.75 6.73 -- 11.18 22.60 2.26
0.025 Nominal 0.300 Nominal 0.100 Nominal 0.700 Nominal 0.130 0.051 -- -- 0.069 0.265 -- 0.440 0.890 0.089
Top View
B M C K
Bottom View
(4 Places)
F R
(3 Places) 8 7 9 10
L
A
N
2 1 15 16
H G
(4 Places)
D
Pin 1 Mark (Optional)
E
(8 Places)
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com http://www.rfm.com HO4002-1-043003
Page 2 of 2

▲Up To Search▲

Price & Availability of HO4002-1

	To Download HO4002-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .